11 Measures to Spray Paint Your Car Like the Professionals - Automobile Bodywork Paint Repair

You may be surprised to see only the best way to spray auto paint actually can not be difficult. That doesn't mean that you go at it and can simply grab a tin of paint. There are some basics you have to understand. Both in application and the preparation.

Step A:



Prepare by assembling all of your things that you're going to need. Any parts that do not need to be sprayed and that can be removed afterward do so.

Measure B:

You will have to analyze the car carefully. These will need to be Alloy Wheel Repair Essex sanded with 300 grit sand paper. This will smooth out the rough spots. In addition, it enables the spray auto paint to stick better. After you have finished sanding, make sure all the dust dirt and debris are taken off the vehicle. It's imperative that the car be perfectly clean.

Step C:

You will need to apply a primer. This will make sure you get an overall even coat of your colored paint plus helps the paint to adhere nicely. When you spray the primer, be sure you allow for drying in between and apply light layers. How to spray on auto paint requires a little getting used to.

Step D:

Now you are well to the point at which you happen to be about ready to spray the shade. You may have decided to use the spray auto paint that comes in aerosol cans, or perhaps you've opted for the spray gun. Before you begin with the auto in either case, make a few practice strokes on an item. Begin the passes with the paint without reluctance, once you might be ready. You may end up getting uneven coverage, if you hold the spray can or gun in one place and potentially the paint will run. Should this happen you have an important repair job on your had. You will most probably have instructions regarding how to spray on car paint using the gear or spray cans.

Step E:

It's up to you whether you want to wet sand between coats of color and primer paints. Check with someone that's comfortable with just how to spray on auto paint, or you may want to research this choice on the web

Step F:

You are down to the finishing touches once you happen to be absolutely satisfied with the shade. You may now want to apply several clear coats. This can give the polish and finished look to the auto in addition to protect the finish. It'll be up to you personally although likely two layers will be satisfactory. Make absolutely certain it truly is dry in between coats.

Step G:

If you favor once again, you've got the option of wet sanding. Again, I recommend you ask the advice of individuals that are comfortable with how to spray paint an automobile. You need with these grits in this arrangement if you determine to follow this measure then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that'll be overly heavy in the clear coat application.

Step H:

Now you will desire to using a rubbing compound to buff the surface so you could use a 2000 grit to remove any scrapes.

Step I:

You should buff the surface. To try this simply use a medium cut polish.

Step J:

As a final touch, you might want to apply several coats of wax.